Flussonic Media Server 21.08

Мы выпустили Flussonic Media Server 21.08.

Для балансировки нагрузки больше не нужно устанавливать IPTV plugin – Flussonic balancer полностью несет ответственность за балансировку.

Замедлится работа протокола HDS, в дальнейшем его поддержка прекратится. Рассмотрите переход с HDS на другие протоколы.

Управлять потоками в веб-панели администратора стало еще проще – теперь они размещены согласно логике видеотракта. На одной странице, у каждого стрима, сразу же видны количество видео и аудиодорожек, на какой карте стрим транскодируется, включены или нет системы DVR, авторизации, DRM и др.

Добавлены настройки для захвата сигнала со спутника 36°Е и аналогичных.

Стал возможным захват ASI-сигнала с карт DekTec PCIe.

Улучшены захват, проигрывание и публикация по SRT (например, можно принимать разные SRT потоки из одного источника, благодаря возможности указывать отдельные порты для проигрывания и публикации у каждого стрима).

Ознакомьтесь с полным списком улучшений и исправлений ниже и обновите ваши серверы как можно скорее!

Что нового

• #7265 (new) (Flussonic) Added RPM build to CI pipeline.
• #7944 (new) (Flussonic) WebRTC now is working on Amazon S3 and other virtual hostings that are using full-cone NAT with 1:1 port mapping to gray IP.
• #11738 (new) (Flussonic) HDS (old flash streaming) code changed to slow implementation, scheduled for removal.
• #12077 (new) (Flussonic) Flussonic supports CentOS 8 now.
• #14640 (improved) (Flussonic UI) Language and subtitles are now displayed for TS and MP4 files as well as for MPEG-TS streams.
• #14942 (new) (Flussonic) Moving load balancer from IPTV plugin to Flussonic.
• #16131 (improved) (Flussonic) Enhanced handling of SDI teletext signal loss.
• #16270 (new) (Flussonic) Added support of the "emergency button" for the sources.
• #16831 (new) (Flussonic) Added new tuning parameters: heterodyne frequency (int_freq) and continuous tone (high_band) to capture DVB-S signal from 36E satellite.
• #17184 (new) (Flussonic) Special flag ("dvr": false|true) added for the purposes of defining DVR session and distinguishing it from live, when requesting a list of open sessions for a specific stream through API.
• #17324 (new) (Flussonic) Added SRT protocol support to ffmpeg, packaged with Flussonic.
• #17327 (new) (Flussonic) Added new load balancing modes: usage, number of clients, output bitrate.
• #17660 (new) (MSE-LD Player) Disabled player controls constantly overlaying during the stream playback on mobile devices.
• #17703 (new) (Catena) Packages API.
• #17820 (new) (Flussonic) Flussonic supports ASI ingest from DekTec PCIe capture card.
• #17838 (new) (Flussonic) You can set multiple publishing locations within one publishing point using templates.
• #18025 (new) (Flussonic) Removed obsolete cdnproxy option from config file.
• #18055 (new) (Flussonic) Flussonic can ingest, publish and play SRT streams.
• #18413 (new) (Flussonic) Flussonic can push SRT streams to other servers.
• #18479 (new) (Flussonic UI) Added EPG upload through Flussonic UI in transponder settings.

Что исправлено

• #4591 (fixed) (Flussonic) Fixed reading RTSP from broken cameras, that do not send SPS in SDP.* #4591 (fixed) (Flussonic) Fixed reading RTSP from broken cameras, that do not send SPS in SDP.
• #14708 (fixed) (Flussonic) Fixed issues with hyper-threading affecting transcoder performance monitoring.
• #15069 (fixed) (Flussonic) Fixed issue with DVR archive cleanup mechanism so that now it works properly and removes files that are stored longer than the depth of the archive.
• #15721 (fixed) (Flussonic) Fixed issues with redirecting in backend authorization, returning HTTP 404 Not found instead of HTTP 302 Found.
• #16095 (fixed) (Flussonic Admin UI) Fixed configuration error after updating configuration for a group of streams sourced from playlist://.
• #16591 (fixed) (Flussonic) Adding some workarounds for Blackmagic bug that happens after a week of work.
• #16615 (fixed) (Flussonic) Fixed issue with requesting archive fragments in case at least one m4f source is unavailable.
• #17022 (fixed) (Flussonic UI) Always show save button in transponder.
• #17165 (fixed) (Flussonic) Fixed lua crypto.aes_ctr_encrypt call.
• #17187 (fixed) (Flussonic UI) Show back transmitted information in clients tab.
• #17188 (fixed) (Flussonic) Deny token "" now will disable also requests without token at all.
• #17232 (fixed) (Flussonic UI) Fixed issue with setting push rtmps:// in Flussonic UI.
• #17301 (fixed) (Flussonic) Fixed issues with capturing HDMI from Decklink cards.
• #17302 (fixed) (Flussonic) Fixed issues with ingesting (capturing) HDMI signal using Magewell ProCapture HDMI card.
• #17387 (fixed) (Flussonic) Fixed issue with redirecting to admin_https when logging in over admin_http.
• #17412 (fixed) (Flussonic) Fixed HTTP 500 error while requesting DASH stream with period=mono option enabled for a DVR playback.
• #17944 (fixed) (Flussonic Admin UI) Fixed issue with empty EPG section of a stream with global "auth" option enabled in config.
• #17966 (fixed) (Flussonic) Fixed minor bugs in maintenance mode without activated license.
• #17967 (fixed) (Flussonic) Fixed ssh-agent startup bug.
• #17981 (fixed) (Flussonic) Fixed issues with Flussonic server not starting with broken license key file.
• #18058 (fixed) (Flussonic) Fixed issue with M4F output if one M4F source is unavailable.
• #18061 (fixed) (Flussonic) Fixed Flussonic compatibility with CentOS 7, but Flussonic's functionality is limited.
• #18146 (fixed) (Flussonic) Fixed online activation of USB dongle licenses.
• #18152 (fixed) (Flussonic) Erlang updated to version 24.0.3.8 due to a critical performance issue in rare conditions.
• #18233 (fixed) (Flussonic UI) Ability to change URL decklink:// at page with stream settings.
• #18245 (fixed) (Flussonic UI) It's possible to setup decklink:// and aja:// as URL for Push.
• #18248 (fixed) (Flussonic) Workaround for OOM issue, introduced by changing to Erlang 24.
• #18307 (fixed) (Flussonic) Fixed issue with high latency on LL-HLS playback. Added chunk_duration (in ms) parameter to manage LL-HLS playback.
• #18368 (fixed) (Flussonic) Fixed issues with passing SCTE35 markers through transponder.
• #18370 (fixed) (Flussonic UI) Allow to specify SCTE35 pid in transponder configuration.
• #18390 (fixed) (Flussonic Coder) Fixed issue that prevented transcoding modules from booting.
• #18439 (fixed) (Flussonic) Fixed algorithm that calculates the output bitrate of a muxer.
• #18448 (fixed) (Flussonic) Fixed invalid video frame size signalling in MPTS MPEG-TS.
• #18066 (fixed) (Flussonic) Enhanced retroview connection of server with USB dongles.
• #18106 (fixed) (Flussonic) Fixed issue with pre-roll. It is now available for usage.
• #18492 (fixed) (Flussonic) Fixed public Docker Hub image.
• #18586 (fixed) (Flussonic) Workaround for broken tls handling in Flussonic v21.04-21.06.